 |
Thermistor
Probes Series 700 Linear
Thermistor Probes For Use with Heavy Duty HDX Handle
OL-700 / THX-700
Thermistor Probes For Use with Heavy Duty HDX Handle
Quick Disconnect
General Purpose Probe - For general purpose gas and liquid immersion measurements. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath, 12" (304 mm) long, it will adapt to most process applications.
Penetration Probe - Easily pierces soft and semi-frozen material as well as soil and sand. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath, 12" (304 mm) long.
Air Probe - For HVAC applications. The small diameter sheath and radiation hood easily fit into duct-work, grilles, and vents. The probe will work with the NEWPORT® HDX handle or can be permanently mounted using OMEGALOK® compression fittings.
Thermistor Probes For Use with Heavy Duty HDX Handle
OL-700 / THX-700
| Series 700 Linear Response probe assemblies are fitted with precision 44018 linear thermistor elements rated to 100°C (212°F). Each is supplied with 10 feet of vinyl covered lead wire. A three (3) conductor phone plug is standard termination. To order longer leads, place an “x” after the model number and specify length up to 250 feet. Additional lead lengths are available at 80˘/ftt. |
 *Add suffix “-V” for vinyl tipped version **For economical plastic version of OL-705-PP, order Model OL-706-PP $68 |
|
Laboratory
OL-701-PP General Purpose Water resistant. Can be buried for sub-soil readings. OL-709-PP Attachable Surface Temperature Stainless steel cup, epoxy backed. Easy to tape on flat surfaces. OL-705-PP Air Temperature Stainless steel probe suitable for test rooms, incubators, remote air readings. OL-706-PP same as the OL-705-PP, but with an economical plastic housing. OL-703-PP Tubular Stainless steel probe for rugged duty. Often used for liquid immersion. Immersible only to transition fitting. OL-710-PP Tubular with Fitting Rugged stainless steel probe with pipe fitting. Suitable for use in pipes or closed vessels. |
Thermistor Probes For Use with Heavy Duty HDX Handle
| THX-700
probes are designed to work with the heavy duty HDX handle.
Each probe has a 3-prong OTP-copper connector termination and
precision 44018 linear thermistor element, rated up to 212°F
(100°C), which will work with all readout instruments designed
for Series 700 probes. Series 700 probes are available with other elements for different ranges and in other lengths and configurations. Contact the Sales Department or send sketch for quotation. |
 |
Quick Disconnect
General Purpose Probe - For general purpose gas and liquid immersion measurements. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath, 12" (304 mm) long, it will adapt to most process applications.
Penetration Probe - Easily pierces soft and semi-frozen material as well as soil and sand. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath, 12" (304 mm) long.
Air Probe - For HVAC applications. The small diameter sheath and radiation hood easily fit into duct-work, grilles, and vents. The probe will work with the NEWPORT® HDX handle or can be permanently mounted using OMEGALOK® compression fittings.
Copyright 2003,
NEWPORT Electronics, Inc. All rights reserved.