INFCDT / INFCDR - Differential Temperature Meter

DIFFERENTIAL TEMPERATURE METER

The differential temperature meter is a versatile dual input indicator/controller. The touch of a button toggles the display between T1, T2 and T1-T2. Analog output is optional, and any one of the three values available can be chosen for this output. Dual 5 Amp relays give you the tools for on/off alarm or control. The control outputs can be tied to T1, T2 or T1-T2.

INFCDT / INFCDR High Performance INFINITY^® Series Meters
	Temperature Displayed as T1-T2, T1 or T2
	J, K, T or J DIN Thermocouple Input, User Selectable
	Optional Programmable Analog Output
	Optional Two Form C, 5 Amp Relays, Each Relay Independently Assignable to T1, T2 or T1-T2
	One-Touch Tuning in Proportional Mode
	2, 3 or 4-wire RTD Input (DIN or NIST)

NEWPORT PRODUCT INFO

• MANUAL - INFCDR PDF
• QUICKSTART - INFCDR PDF
• MANUAL - INFCDT PDF
• QUICKSTART - INFCDT PDF
• MECHANICAL
• PRICE

•

REQUIRES ADOBE ACROBAT - HELP

The user selects either J, K, T or J DIN thermocouple input from the front panel. The units of measure can be switched between °C and °F with the front-panel pushbuttons.

The optional analog output may function as retransmission of temperature or assigned to Setpoint #1 and used as a proportional control output (-011 required). Setpoint #1 will still continue to operate as a setpoint, while the analog output of either 4-20 mA or 0-10 V may be used to proportionally control an external process.

Industrial Thermocouples

SPECIFICATIONS
Isolation: Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260 Vrms or DC.
NMR: 60 dB
CMR: 120 dB
Overvoltage: 240 V rms
Display: Red 14-segment LED, 13.8 mm (0.54")
Analog-to-Digital Technique: Dual slope
Internal Resolution: 15 bits
Read Rate: 3/sec
Polarity: Automatic
Accuracy at 25°C: ±0.5°C (after 30 min. warm-up)
Span Tempco: ±50 ppm/°C
Step Response: 1-2 sec
Analog Output: Current or voltage, 0-10 V, 4-20 mA, or 0-20 mA
AC Power Unit: 115 Vac or 230 Vac ±10%; 50-60 Hz, 8 watts max.
DC Power Unit: 10-32 Vdc or 26-56 Vdc; 7 watts max
Operating Temperature: 0-50°C, (32-122°F), RH 90% at 40°C (non-condensing)
Panel Cutout: 45 x 92 mm 1/8 DIN, (1.77" H x 3.62" W)
Weight: 574 g (1.27 lb)

Input Ranges

Model	Input Type	Range
INFCDT	J K T J DIN	-210 to 760°C (-346 to 1400°F) -270 to 1372°C (-454 to 2500°F) -210 to 400°C (-346 to 752°F) -200 to 900°C (-328 to 1652°F)
INFCDR	100ohm Pt, RTD 2, 3, 4-wire	-200 to 850°C (-328 to 1562°F) alpha = 0.00385 or 0.00392

To Order (Specify Model No.) Prices Shown in U.S. Dollars

Model INFCDT - INFCDR
*()**	*()**	*()**	INFINITY C Differential Thermocouple Meter	$345
-	-	-	INFINITY C Differential RTD Meter	$345
-	-	-	Power and Display	-
0	-	-	115 Vac red	N/C
1	-	-	230 Vac red	N/C
2	-	-	115 Vac Green	N/C
3	-	-	230 Vac green	N/C
4	-	-	10-32 Vdc, red	$95
5	-	-	10-32 Vdc, green	$95
6	-	-	26-56 Vdc, red	$120
7	-	-	26-56 Vdc, green	$120
-	-	-	Control Outputs
-	0	-	No Outputs	N/C
-	1	-	Dual 5A form C relay outputs	$70
-	-	-	Analog Outputs
-	-	0	No Outputs	N/C
-	-	1	Analog Output	$80
-	-	2	Isolated Analog Output	$90

THERMOCOUPLE	RTD pt100	Description	Price
INFCDT-(†)00 A	*INFCDR- ()00 A**	Digital thermometer, basic unit	$345
INFCDT-(†)01 A	*INFCDR- ()01 A**	Digital thermometer with non-isolated analog output	$425
INFCDT-(†)10 A	*INFCDR- ()10 A**	Digital thermometer with dual setpoint (6-Amp form "C" relays)	$415
INFCDT-(†)11 A	*INFCDR- ()11 A**	Digital thermometer with dual setpoint and non-isolated Analog output	$495
INFCDT-(†)12 A	*INFCDR- ()12 A**	Digital thermometer with dual setpoint and Isolated Analog output	$505

Ordering Example: INFCDT-011, differential thermocouple indicator, 115 Vac, red display, optional dual relays and optional analog output, $345 + 70 + 80 = $495.