Wire calibration requires cutting approximately 3' from the spool being tested, forming a bead and performing the calibrations. The tested wire will be sent along with the spool and certification.
Certificate of Conformance Sample Certification Upon request, NEWPORT will certify that the product(s) shipped on the buyer’s purchase order are manufactured in accordance with all applicable specifications and published data sheets. This calibration is provided at no charge. Please specify at the time of order to receive this certificate. Model No.CAL-1 Certificate of Calibration Sample Certification Upon request, NEWPORT will certify that product shipped (model number, serial number, and buyer’s purchase order number specified) has been calibrated and tested to meet or exceed published specifications. Calibration and testing are performed using instrumentation and standards traceable to the U.S. National Institute of Standards and Technology (NIST). This calibration is provided at no charge. Must be requested at the time of order. Model No. CAL-2 NIST Traceable Certificate of Calibration with Test Data $75 Sample Certification Same as CAL-2, with the addition of actual tested data points along with NIST traceable test numbers. A CAL-3 provides the same documentation as a CAL-1/CAL-2 and gives you discrete test points of data and NIST traceable test numbers. This calibration is performed in accordance with ISO10012-1.1992, ANSI/NCSL Z540-1.1994, and MIL-STD 45662A. Model No. CAL-3 Certificate of Calibration $125 Sample Certification Same as CAL-3, Calibration traceable to NIST with 4 data points (3 humidity and 1 temperature) across the instrument’s range. A CAL-3-HU provides the same documentation as a CAL-3 and gives you discrete test points of data and NIST traceable test numbers. This calibration is performed in accordance with ISO10012-1.1992, ANSI/NCSL Z540-1.1994, and MIL-STD 45662A. Model No. CAL-3-HU Certificate of Calibration $175 Sample Certification Same as CAL-3-HU, but for dual channel units. Calibration traceable to NIST with 4 data points (3 humidity and 1 temperature) across the instrument’s range, per channel . A CAL-3-HU-DUAL provides the same documentation as a CAL-3 but there is one certificate for each channel. The certificates give discrete test points of data and NIST traceable test numbers. This calibration is performed in accordance with ISO10012-1.1992, ANSI/NCSL Z540-1.1994, and MIL-STD 45662A. Model No. CAL-3-HU-DUAL NIST TRACEABLE CALIBRATION OF PROBES Sample Certification NEWPORT certifies that the item has been calibrated and the calibration is certified as traceable to NIST. NIST test numbers are documented on the certificate for traceability. Pricing: $75 setup charge plus $25 per temperature calibration point for thermocouples or $35 per temperature calibration point for RTDs. For wire, setup charge is $90. Model No. CAL-4 Certificate NIST Traceable Calibration at Customer Specified Temperature Points* From $100 FACTORY CALIBRATION OF PROBES Available for Types J, K, T, E and N mineral insulated thermocouples: quick disconnect, transition junction, utility handle, and low-noise styles. Each probe certified at four temperature standards. Calibration card included "pre-stocked" with each probe. Model No. CAL-5 Factory Calibration Certificate $15, probe calibrated at 4 fixed temperature points
CALIBRATION KIT 33% and 75% RH standards. INSTRUCTIONS 
Model No. CT485B-CAL-KIT |
||||||||||||||||||
