|
Model
No.
|
6-DIGIT
MICROPROCESSOR METER FOR DC VOLTS, CURRENT, TEMPERATURE, AND
STRAIN WITH SENSOR EXCITATION |
|
INF
Series
|
Standard features include 4-open collector outputs, wide selection of input ranges, peak and valley detection, smart filtering, large digital offset capabilities, on-board sensor excitation, and field installable output, control and communication options. |
|
INPUT
TYPE
|
DESCRIPTION |
PRICE
|
|
INFP
|
Process
meter accepts 0-100 mV, +50 mV, 0-5 V, 1-5 V, 0-10 V, +5
Vdc, 0-20 mA and 4-20 mAdc inputs, with 5, 10, 12 or 24
Vdc sensor excitation. Factory
default setup is 4-20 mA input with 24 V sensor excitation
and scaled to display 0-100.0 |
|
INFP
|
PROCESS-INFINITY
meter |
$570.00
|
|
INFZP
|
PROCESS-INFINITY
"Split meter with remote display" |
$620.00
|
|
INFS
|
STRAIN-INFINITY
meter for strain gage, pressure transducer, load cell and
virtually any bridge input. On-board transducer excitation.
Easy scaling to engineering units. Factory default setup
is 0-100 mV input with 10 V dc sensor excitation scaled
to display 0 to 100000. |
|
INFS
|
STRAIN-INFINITY
meter |
$570.00
|
|
INFZS
|
STRAIN-INFINITY
"Split meter with remote display" |
$620.00
|
|
INFW
|
SCALE-INFINITY meter offers a wide range of DC voltage
and current inputs that can be configured to display and
transmit your input signal in any engineering units. Factory
default setup is 0-100 mV input with 10 Vdc sensor excitation
scaled to display 0 to 1000000. |
|
INFW
|
SCALE-INFINITY
meter |
$595.00
|
|
INFZW
|
SCALE-INFINITY
"Split meter with remote display" |
$645.00
|
|
INFU
|
UNIVERSAL-INFINITY meter with all the capabilities of
the Temperature, Process and Strain versions available in
one instrument. Factory default setup is 0-100 mV DC input
with 10 Vdc sensor excitation to display 0 to 100000. |
|
INFU
|
UNIVERSAL-INFINITY
meter |
$645.00
|
|
INFZU
|
UNIVERSAL-INFINITY
"Split meter with remote display" |
$695.00
|
|
INFT
|
TEMPERATURE-INFINITY
meter with all the capabilities of the Temperature, Process
and Strain versions available in one instrument. Factory
default setup is 0-100 mV DC input with 10 Vdc sensor excitation
to display 0 to 100000. |
|
INFT
|
TEMPERATURE-INFINITY
meter |
$595.00
|
|
INFZT
|
TEMPERATURE-INFINITY
"Split meter with remote display" |
$645.00
|
|
OPTIONS
|
DESCRIPTION |
PRICE
|
|
POWER AND LED COLOR
|
|
0
|
Designates
115 Vac power and red LED display |
N/C
|
|
1
|
Designates
230 Vac power and red LED display |
N/C
|
|
2
|
Designates
115 Vac power and green LED display |
N/C
|
|
3
|
Designates
230 Vac power and green LED display |
N/C
|
|
4
|
Designates
10-32 Vdc power and red LED display* |
$110.00
|
|
5
|
Designates
10-32 Vdc power and green LED display* |
$110.00
|
|
*
Not available REL4 below.-
|
|
BCD
AND CONTROL OUTPUT (S)
|
|
0
|
Four
optically isolated open-collector outputs |
N/C
|
|
1
|
Isolated parallel BCD output (BCD1) |
$110.00
|
|
2
|
Isolated
dual 7 A relays (REL1) |
$75.00
|
|
3
|
Isolated
dual 7 amp and dual 1 amp relays* (REL4) |
$175.00
|
| *
Not available with dc power options 4 and 5 above. |
|
ANALOG
OUTPUT
|
|
0
|
No
analog output |
N/C
|
|
1
|
Isolated
analog output (0-20 mA, 4-20 mA, 0-5 V, 1-5 V, 0-10 V (AN03) |
$110.00
|
|
SERIAL
OUTPUTS
|
|
0
|
No
serial output |
N/C
|
|
1
|
Isolated
RS-232 serial output* (RS20) |
$110.00
|
|
2
|
Isolated
RS-485 serial addressable output* (RS40) |
$110.00
|
|
* Includes 6’ of interconnecting cable with telephone plug
connectors. See serial connector accessories below for
conversion to "D" type connectors.
|
|
TEMPERATURE
|
|
TC
|
J,
K, E, T, B, S, N or DIN J in degrees C, F or K |
N/C
|
|
RTD1
|
10
ohm copper** |
N/C
|
|
RTD2
|
100
ohm platinum with 0.00385 alpha** |
N/C
|
|
RTD3
|
100
ohm platinum with 0.00392 alpha** |
N/C
|
**Enter
C for Celsius, F for Fahrenheit, or K for Kelvin.
NOTE: All of the above ranges are available on the Universal
INFINITY®.
|
|
ADD-ON
OPTIONS
|
|
FS
|
Special calibration configuration |
$45.00
|
|
BL
|
Blank
Lens |
$15.00
|
|
ACCESSORIES
|
|
9SC2
|
9-pin
serial connector with RJ-11 jack for RS-232 |
$30.00
|
|
9SC4
|
9-pin
serial connector with RJ-12 jack for RS-485 |
$30.00
|
|
25SC2
|
25-pin
serial connector with RJ-11 jack for RS-232 |
$30.00
|
|
25SC4
|
25-pin
serial connector with RJ-12 jack for RS-485 |
$30.00
|
|
SP1
|
Split
connector for RS-485 network |
$15.00
|
