|
Model
No.
|
4
1/2 DIGIT METER FOR DC, AC RMS, OR STRAIN |
PRICE
|
|
|
4
1/2 digit (±19,999 count) digital indicator. Standard features
include field scalability for process or strain-gauge inputs,
thermocouple or RTD inputs, display hold, screw- terminals
for power and signal, and a 104 mm deep 1/8 DIN case.
|
$390.00
|
|
OPTIONS
|
DESCRIPTION |
PRICE
|
| INPUT
SIGNAL |
|
*
|
DC
voltage |
N/C
|
|
AVG
|
AC
voltage (includes D4) |
$160.00
|
|
RMS
|
True
RMS voltage (includes D4) |
$160.00
|
|
LA1
|
Gain-programmable
preamplifier with active filter and bridge excitation supply |
$214.00
|
|
LP1
|
Gain-programmable
preamplifier with peak-hold and bridge-excitation supply |
$234.00
|
| INPUT
RANGE |
|
*
|
Not
applicable for LA1, LP1 or FS input signals |
N/C
|
| TEMPERATURE
COEFFICIENT |
|
*
|
Standard
(±0.006% of reading/°C) |
N/C
|
|
LT
|
High-stability
(±0.002% of reading/°C) (mutually exclusive with options
AVG, RMS, LA1, LP1) |
$25.00
|
|
READ-RATE OPTION
|
|
*
|
Standard
(4.3/s at 60 Hz, 3.6/s at 50 Hz) |
N/C
|
|
FR
|
10
measurements/sec at 60 Hz power only (mutually exclusive
with options AVG, RMS, LA1, LP1, F3P) |
$25.00
|
| 3-WIRE
RATIO DC INPUT IMPEDANCE |
|
*
|
Standard |
N/C
|
|
HZ
|
High
impedance (1 G ohm reference input only). |
$20.00
|
| UPPER-BOARD
OUTPUT OPTIONS - Mutually exclusive with LA1, LP1, F3P,
F80A and FR. |
|
*
|
None
(unbuffered, non-isolated BCD is standard)* |
N/C
|
|
F3A
|
Buffered,
gated and stored BCD output* |
$109.00
|
|
F3P
|
Stored
peak or valley BCD output* |
$139.00
|
|
F4A
|
Buffered,
isolated, gated and stored BCD output* |
$124.00
|
|
F4M
|
F4A
with 4-line binary addressing* |
$129.00
|
|
06
|
Single-setpoint
controller with TTL and 1A relay outputs (requires option
D4)* |
$110.00
|
| POWER |
|
*
|
120 Vac (optimized for 60 Hz rejection) |
N/C
|
|
C1
|
240 Vac (optimized for 50 Hz rejection) |
N/C
|
|
C3
|
5
Vdc (optimized for 60 Hz rejection** |
$45.00
|
|
C4
|
5
Vdc (optimized for 50 Hz rejection)** |
$45.00
|
| - |
**Not
available with AVG or RMS inputs. |
-
|
| ADD-ON
OPTIONS |
|
D4
|
Screw-terminal
barrier strip for power and signal Removes power and signal
from D1. D4 Option required for CE |
$16.00
|
|
BL
|
Lens
without Newport logo |
$15.00
|
